Rubberized Bitumen Emulsion
ASFABIT RBL+ is a cold applied rubberized bitumen emulsion in dark brown color that, when dries, it forms tough black seamless and flexible coating.
Packaging:
ASFABIT RBL+ is packed in 200 Liter Drums
Consumption:
2 to 4 m² / liter
Storage:
Should be stored under cover away from extreme heat or direct sunlight or frost.
Shelf life:
12 months in tightly sealed containers if stored properly.
|
|||||||||||||||||||||||||||
Surface preparation
The surface of the concrete shall be sound, clean and uncontaminated.
This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose particles and any deleterious matter. If the concrete surface is defective or has laitance, it must be cut back to a sound base.
Moss and lichen must be removed physically followed by treatment with fungicidal wash. After treatment, it must be washed down thoroughly with clean water and allow to dry.
Priming
Hot, very dry or porous surfaces should be primed before applying ASFABIT RBL+.
Mixing
ASFABIT RBL+ should be stirred before use until uniform color and consistency is achieved. Product is ready for use.
Application
For waterproofing underground structures, the bituminous emulsion shall be applied by brush or roller depending on the dry film thickness required. 300 micron dry film thickness (DFT) can be achieved when applied at 3m² /Lt/coat. The two coats must be applied at right angles to one another with a minimum of 6 hours intervals between each application at 35°C. Ensure that coat is completely dry before the next coat is applied.
Cleaning
ASFABIT RBL+ products should be removed from tools, equipment and mixers with clean water prior to the initial set. Cured material can only be removed mechanically.
Recommendation
ASFABIT RBL+ is non-flammable, non-hazardous product. However, proper measures should be taken during work to avoid contact with eyes or skin. In the event of contact with eyes, wash immediately with clean water and seek medical care.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Cold Applied Bitumen Emulsion
Emulsified Thixotropic Flexible Protective Barrier to Vapor Transmission
Quality Black Bitumen Primer
Flexible, Rubberized Bitumen Emulsion
FLEXIBLE, RUBBERIZED BITUMEN EMULSION
Rapid Setting Water Plug Mortar