Grouting & Anchoring

Cement Based Grouts

Monneli Espocem HES

High Early Strength Non Shrink Cementitious Grout

Uses
ESPOCEM HES is suitable for use precast concrete applications and for other structural sections of concrete where high early strength is required. Used for:
Machinery anchoring
Anchoring bolts of steel structures footings
Rigid filling of prefabricated elements
Underpinnings
Heavy duty support beneath machine base plates
Tie bar hole filling
Crane rails
Precast elements
Pile head treatment
Repairing and construction of degraded or damaged structural elements such as concrete beams, columns, walls, honeycombed concrete, floors and pillars
Repair of concrete pavements (roads, airports, industries), and rigid joints filling, up to 25 cm of thickness, in prefabricated residential and industrial building
back to Grouting & Anchoring
Technical Information
Product Description

Features a high compressive strength designed to suit in projects that specifically requires an early strength development. ESPOCEM HES consists of special blend of cement, silica sand, selected aggregate and chemical additives that when mixed with water produces a self-leveling, nonshrinking and very fluid mortar, with high initial and final mechanical strength. The mix is flowable which makes it easier to apply in irregular spaces.

Advantages
  • Suitable for heavy duty support under machines base plates
  • After curing, the product has high mechanical resistance even after a short time of curing
  • Thermal expansion coefficient and permeability coefficient which is similar to high quality concrete
  • Low alkali content minimizes the risk of alkali-silica reaction
  • Exceptional bond to concrete substrates without primer
  • Suitable for placement by pumping or pouring techniques
  • Self compacting, flowable nature eliminates honey combing while applying without vibration (ensures a complete filling of damaged and irregular areas)
  • Low permeability and high strength which cause very good protection against chlorides and carbon
Compiliance Standard

n ASTM C 109, 1107, 827

n BS 1881, BS 4551 & BS 6319

n UNI 8147

Packaging, Coverage / Consumption

n Packaging:

ESPOCEM HES is supplied in 25kg bags.

 

n Yield: 

11.7 liters per 25kg bag.

Shelf Life & Storage

n Storage:

Keep the product in dry and sheltered place into original well closed packaging. In these conditions, product shelf life will be 12 months from date of production.

Colors
Grey
Technical Properties
PROPERTIES RESULTS
Appearance  Grey powder 
Dry density at 25⁰C  2.38 kg/L 
VOC 2.0 g/L 
Compressive strength (ASTM C579)  
at 24 hours 50 N / mm²
at 7 days 75 N / mm²
at 28 days 90 N / mm²
Flexural strength at 28 days (ASTM C580) 10 N / mm²
Expansion at 24 hours (UNI 8147) Up to 1%
Initial setting time 1.5 - 2 hours
Final setting time 3 – 3.5 hours
Noxiousity according to  ECM 88/379 No
All values are subject to 5-10 % tolerance
Application Information
Instructions for use

Surface Preparation

The surface must be solid, compact, clean, free from dust, cement laitance, curing compound, oils, grease, etc. All loose parts of concrete should be removed. A coarse surface profile with the aggregate exposed is preferred.

Saturate the support with water several hours prior to grouting. Concrete surface should be only damped (with no free water) prior to grouting in order to avoid possible water absorption at the moment of casting. Base plate must be clean and free from oil, grease, rust, etc.

Formwork should be constructed to be leak proof as ESPOCEM HES is a free flowing grout. It should also include outlets for the pre-soaking water.

Mixing

To prepare the mortar, pour into a cement mixer or into a container about 3.0-3.5 Liters of clean water (according to required consistency) for every 25kg bag of ESPOCEM HES.

Mix for 5 minutes using mixer or drill machine fitted with suitable paddle till obtaining a homogeneous mixture, free from lumps.

Application

The mixed grout should be poured only from one side of the formwork to eliminate the entrapment of air. This can be achieved by pouring the grout across the shortest distance. Maintain a constant hydrostatic hand, preferably of at least 15 cm on the side where the grout has been poured, allow 10 cm clearance between the side of the form and the base plate of the machine.

Do not add extra water to the mix more than what specified. If the mix starts to harden, do not use the mix. Prepare a new one.

ESPOCEM HES can be placed in thicknesses up to 25 cm.

Curing

The repaired area shall be cured in accordance with good concrete curing practice and protected from drying winds. Curing shall be done with non-degradable curing compound BETOCURE AR.

Alternately; a wet Hessian cloth covered with polyethylene sheet can also be employed.

Cleaning

ESPOCEM HES should be removed from tools and equipment and mixers with clean water immediately after use. Cured material should be removed mechanically.

Recommendations

n Do not apply the product at a temperature less than +5ºC. Variation of temperature will increase or reduce the initial and final setting time of the mortar

n During the peak temperature of the day in the summer season, working area should be covered if work to be executed externally

n In warm weather, store the material in cool place. 

n Make sure to use cool water to keep the mixed mortar temperature below +25ºC.

Additional Information
Health & Safety

ESPOCEM HES is a cement-based product.

During application, wear appropriate protective clothing, goggles, gloves and respiratory equipment if necessary.

In case of contact with skin, rinse with water and again wash thoroughly with soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice accordingly.

If ingested, obtain medical attention immediately. Do not induce vomiting.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.25Mb)
OTHER PRODUCTS
More Products from this section
Monneli Espansil

EXPANSIVE POWDER FOR CEMENT MORTAR & CONCRETE REPAIR

Monneli Espansil Cable Flow

NON SHRINKAGE GROUT FOR FILLING CABLE DUCTS

Monneli Espansil Cable Flow*
NON SHRINKAGE GROUT FOR FILLING CABLE DUCTS

">

NON SHRINKAGE GROUT FOR FILLING CABLE DUCTS

Monneli Espocem

NON SHRINK CEMENTITIOUS GROUT FOR ANCHORING & FILLING

Monneli Espocem GP

GENERAL PURPOSE NON-SHRINK CEMENTITIOUS GROUT

view more
RANDOM PRODUCT
Monneli Elastogum

High Elastomeric Acrylic Waterproofing Membrane

Uses
ELASTOGUM adheres perfectly to several supports as, concrete, asbestos cement, gypsum boards, plaster boards, all cement surfaces, and hydrite screeds, woods, metallic surfaces, stucco, EIFS etc.
As waterproofing and protective coating and for wet areas not exposed to pressurized water, such as showers, kitchen, bathrooms, residential buildings and hospital
Can be used as a waterproofing coating on horizontal and vertical surfaces on top of concrete, metal, asbestos, stucco etc.
Used as a part of the waterproofing system for roofs, terraces, balconies, shower stalls, etc.
Connected products
Monneli Betocure AR

Acrylic based concrete curing compound

Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map