Brush Grade Polyurea
ARMATUREA BG two component hand applied, cold cured polyurea waterproofing membrane with fast cure times, excellent elongation and excellent moisture tolerance. It is easy to apply, flexible, seamless, waterproofing solution for a wide range of waterproofing applications.
Packaging:
ARMATUREA BG is supplied in 20kg kits
Storage:
ARMATUREA BG should be stored in original, unopened factory containers, under normal storage conditions of 10°C to 30°C. Avoid product freezing. In these conditions, prouct shelf life is 12 months from the date of production. Keep it far away from direct sunlight and fire source.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
Surface Preparation
The surface of the substrate shall be sound, clean and uncontaminated.
This preparation shall be such as to leave a sound expose surface free from dust, loose particles and any deleterious matter. If the surface is defective or has laitance, it must be cut back to a sound base.
New concrete or cementitious surfaces should be at least 28 days old and have moisture content not exceeding 5%. Old or existing surface should be refurbished mechanically to ensure clear and sound substrate.
Priming
It is recommended to seal porous low-quality concrete surface with UREAPRIME EP1, a solvent-free, low viscosity penetrating epoxy primer.
Mixing
Stir the contents of the Component B container using a slow RPM stirrer. Avoid using a high-speed stirrer and introducing air into ARMATUREA BG.
Combine the Component A and the Component B at the specified ratio by weight and stir the combined product using a slow RPM stirrer.
Application
ARMATUREA BG does not require any specific application equipment. Pour the ARMATUREA BG onto the prepared substrate and spread using a brush, rake trowel, or roller. If a slip resistance surface finish is required broadcast QUARTZO graded aggregates into the final layer of ARMATUREA BG while it is still wet.
Recommendations
All body parts should be covered and activated charcoal respirators or forced-air breathing apparatus are necessary for safe application of this product. Keep uncured product away from children at all times. All personnel should read and understand the safety recommendations stated in the Material Safety Data Sheet.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its productsas it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Aromatic Pure Polyurea
HYBRID POLYUREA
Primer for Polyurea
Grout for Sealing Glass Blocks