Waterproofing

HDPE Membrane System

Monneli Proof HDPE Tape

High Performance Self Adhesive Tapes

back to Waterproofing
Technical Information
Product Description

A specialized range of high performance self adhesive sealing tapes engineered specifically for use with PROOF HDPE waterproofing membranes.  Each tape ensures a watertight continuity at overlaps, joints, and termination details, designed for blindside waterproofing assemblies in pre-applied below grade waterproofing application, these tape provides exceptional adhesion to both the HDPE membrane and concrete substrates.

 

      Tape Type Typical Use & Characteristics
   

PROOF HDPE TAPE C120

Cover Type for Patching

  • Cover membrane end laps and repair
  • Fully bond to post cast concrete
  • Prevents water migration
  • Weatherable as membrane
   

PROOF HDPE TAPE D80

Double-Sided Tape for End Lap & Detailing 

  • Seal end laps
  • Superior bond to various materials
  • Solvent free
  • Waterproof
     PROOF HDPE TAPE TS80
Sand Cover Tape for Patching 
  • Cover membrane end laps and repair
  • Fully bond to post cast concrete
  • Prevents water migration
  • Weatherable as membrane
    PROOF HDPE TAPE T160
Single-Sided Tape for Butt Joint
  • Single-side seamless join two end laps
  • Enforce the inside/outside
  • Same physical properties as HDPE membrane
Advantages
  • Cold applied, easy installation
  • Excellent adhesion to HDPE membranes
  • Excellent adhesion to a wide variety of substrates
  • Provides watertight sealing at terminations, joints, and overlaps.
  • Water resistant
  • Resitant to alkali and mild acids
  • Excellent durability
  • Longterm bond stability
Packaging, Coverage / Consumption

Packaging:

  Property PROOF HDPE TAPE
  C120 D80 TS80 T160
  Thickness 0.35mm 0.40mm 0.80mm 1.20mm
  Roll Width 120mm 80mm 80mm 160mm
  Roll Length 50m 50m 15m 20m
Shelf Life & Storage

Storage:

Keep PROOF HDPE TAPE  away from direct sunlight. It must be stored in a dry and clean room away from ignition sources, open flame or any source of chemical contamination.  

Application Information
Instructions for use

Installation

To ensure proper application and superior adhesion, it is crucial to prepare the surface correctly by ensuring it is clean, dry and free of any dust or any deleterious matter. Apply even and firm pressure for optimal adhesion.

Additional Information
Health & Safety

During application wear appropriate Personal Protective Equipment which includes clothing, goggles, gloves and respiratory equipment if necessary. Refer to MSDS for more detailed safety instructions.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.24Mb)
OTHER PRODUCTS
More Products from this section
Monneli Proof HDPE 1200

High Performance Pre-Applied HDPE Waterproofing Membrane

Monneli Proof HDPE 1500 PA

High Performance Self-Adhesive Waterproofing Membrane

Monneli Proof HDPE 3400 Plus

Pre-Applied Fully Bonded Waterproofing Membrane

RANDOM PRODUCT
Monneli Epofloor P125

POLYURETHANE COATING FOR CONCRETE FLOORS

Uses
EPOFLOOR P125 can be applied on wide range of surfaces, such as concrete, wood, steel, asbestos, etc.
It can be used for coating concrete floor in the following:
Alimentary
Pharmaceutical industries
Warehouses
Mechanical rooms
Car parks
Showrooms
Workshops
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map