Monneli Elastojoint PVC Tape

PVC Elastomeric Waterproofing Tape

ELASTOJOINT PVC TAPE is mainly used as a part of a PVC membrane waterproofing system. It can be used for expansion joints and cracks.
back to Waterproofing
Technical Information
Product Description

ELASTOJOINT PVC TAPE are flexible polyvinyl chloride elastomeric waterproofing tapes.

  • Extremely flexible
  • Weather resistant
  • Water resistant
  • Root resistant
  • Good resistance to many chemicals
  • UV-resistant
  • Performs well within a wide temperature range
  • Can be used in contact with potable/drinking water
Packaging, Coverage / Consumption

1.0 mm  - 10,15,20,25,30 cm
1.5 mm - 10,15,20,25,30 cm
2.0 mm - 10,15,20,25,30 cm

Shelf Life & Storage

Product should be stored in dry conditions at temperatures between +5°C and +30°C. Shelf life is 36 months from date of production if stored properly in undamaged, unopened original sealed containers.

Technical Properties


Tensile Strength Longitudinal/transversal (DIN 16938)

> 11.00 N/ mm² both directions

Elongation Longitudinal/transversal (DIN 16938/DIN 16730)

> 300% both directions

Thermal Stability (DIN 16938)

< 1.0%

Tear Strength (DIN 16730)

> 100 N

Cold Bend (DIN 16730)

No cracks at -30°C

Slit Pressure Resistance (SIA 280/4)


Roots Resistance (SIA 280/10)


Combustibility (SIA 280/11)


Water Vapour Diffusion Resistance (DIN 16730)

Less than 21,000

Water Absorption (SIA 280/12)


Compressive Strength (SIA 280/13)


Puncture Resistance (DIN 16938)


Seam Strength (SIA 280/15)


Durability of Water Tightness against Chemicals (DIN 16938)


Resistance to Algae & Rot (DIN 16730)

No penetration, growth dies off

Application Information
Instructions for use


Selection of the correct tape size (thickness and width) depends on the expected performance. If necessary, ask COLMEF for technical advice. Tapes of 1 mm thickness are suitable for sealing of joints subject to light load only.

Maximum permissible permanent elongation:
1 mm tape: 10% of the non-adhered tape width
2 mm tape: 25% of the non-adhered tape width.

Tape ends are connected by hot air thermal welding.
Overlaps have to be 50 mm.

Please refer Insuwrap product data sheet for further

Additional Information
Health & Safety

Local safety regulations must be observed. Information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet.

Important note

The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.

additional materials
Fast Download
Technical Properties Sheet
download (*.pdf 0.06Mb)
More Products from this section
Monneli Elastojoint PVC

Flexible PVC Waterstop

Monneli Elastojoint RHS

Re-Injectable Hose Waterstop System

Monneli Elastojoint RHS Plus


Monneli Elastojoint SB20

Hydrophilic Swellable Waterstop Joint Profile

Monneli Elastoseal WS

Fixing glue / Joint Sealant

Monneli Neofil Color 0-4 mm

Latex Modified Cementitious Tile Grout for Joints 0-4 mm Wide

NEOFIL COLOR 0-4 can be used for sealing up to 4 mm joint width ceramic tiles, clinker, quarry tile, mosaics, etc. It is suitable for floors and walls joints internally and externally, including kitchens and bathrooms.
To obtain high resistant characteristics (heavy traffic) or high waterproofing resistance (swimming pools), it is recommended to mix NEOFIL COLOR 0-4 with GIUNTOLASTIC instead of water.
Contact us
Choose a location
P.O. Box: 123808, Dubai
Toll: +971 4 8803488
Fax: +971 4 8803450
Site Map