Solvent Free Epoxy Primer and Levelling Mortar Binder
PRIMER POXY FF* is a universal primer for the EPOFINISH and EPOFLOOR product range, its applied on prepared concrete and cementitious substrates to seal the substrate and enhance bonding with top coats. PRIMER POXY FF* is a two component solvent free epoxy resin that has sealing properties making it ideal for concrete substrates.
Consumption:
Primer Poxy FF* - 15L Kit
Quartzo No. 2 or No. 6 – 25kg
| Coating System | Products | Consumption |
| Priming | Primer Poxy FF* | 7-10 M2/L per coat |
| Levelling mortar fine / smooth surface | 1 kit Primer Poxy FF*: 1 bag Quartzo No. 2 / Quartzo No. 6 | ~1.8kg/m²/mm |
| Levelling mortar medium rough surface | 1 kit Primer Poxy FF*: 2-3 bags Quartzo No. 2/ Quartzo No. 6 |
~2kg/m²/mm |
Packaging:
PRIMER POXY FF* is supplied in 15 Liter kits.
Quartzo No. 2 & No. 6 is supplied in 15 liter kits.
Storage:
Store the product in dry closed place with temperature between +5°C and +35°C. In these conditions, the product maintains its stability for 12 months.
|
|||||||||||||||||||||||
Surface Preparation
The surface should be sound, clean, dry and free from loose and flaking materials, efflorescence, laitance, curing compounds, dirt, oil, grease or other contaminants. Mechanical methods like grinding or grit/captive blasting in order to provide a suitable profiled open textured surface is strongly recommended.
New concrete or cementitious surfaces should be at least 28 days old, have moisture content not exceeding 5% and relative humidity of the concrete is 75% or below. Old or existing floor should be refurbished mechanically to ensure clear sound substrate.
Surface irregularities and blow holes shall be repaired with EPOFINISH C, a solvent free epoxy resin repair mortar. Allow the applied material to harden. After all preparation is complete, ensure dust is removed from the surface using an industrial vacuum.
Expansion joints shall be repaired using EPOMORT HS, a High strength solvent free epoxy mortar.
Mixing
As a primer
Mix PRIMER POXY FF* as supplied. Add the entire content of hardener can to the base can and mix thoroughly for about 2 minutes.
As levelling mortar
Once base and hardner are mixed thoroughly add Quartzo mix thoroughly until a uniform consistency is achieved. To ensure thorough mixing pour materials into another container and mix again to achieve a consistent mix. Avoid overmixing to minimise air entrainment.
Mixing Tools
Application
As a primer
Once mixed, the PRIMER POXY FF* shall be immediately applied in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles.
As levelling mortar
Rough surfaces need to be levelled first. Apply the levelling mortar by squeegee/trowel to the required thickness.
Cleaning
Clean tools with SOLVENTE 10 promptly before material hardens. Cured material must be mechanically removed.
Recommendations
Avoid contact with skin & eyes. Protective clothing such as gloves & safety goggles should be worn during application. Treat any splashes to the skin or eyes with fresh water immediately.
Should the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure adequate ventilation at site and avoid inhalation of vapors.
The information in this Technical Data Sheet is based on Colmef Monneli’s experience. Colmef Monneli does not accept any liability arising from the use of its products as it has no direct or continuous control over where or how its products are applied. All Colmef Monneli’s Data Sheets are updates on regular basis. It is the user’s responsibility to obtain the latest version.
Solvent Based Epoxy Primer
Fast Cure Solvent-Free Epoxy Primer for Concrete Floors
Penetrating Solvent-Free Epoxy Primer for Concrete Floors
Solvent Free High Performance Epoxy Primer
Water Based Epoxy Primer
High Strength Cementitious Ready Dry Mix Plaster